How To Use Builder Gel With Dip Powder

Recently discovered the magic of builder gels? If yous're someone who likes to have long or well-manicured nails just doesn't have the time to get to a salon every few weeks, you might be interested in learning how to use architect gel. Architect gels are thick and sticky, perfect for creating faux nails or overlays, as well as extending the length of your natural nails.

Then, how easy is it to use architect gel, and what'southward involved?

Let's observe out!

Hither's what we'll cover:

What do you need to do builder gel nails?

If you want to use builder gel to do your ain nails at dwelling house, here'south what you'll need:

Nail file
Buffer
Cuticle pusher
Either a dehydrator, a gel base, or a primer/bonder
Architect gel and application brush (or builder gel in a canteen)
A UV or LED lamp
Tips or forms (if doing extensions)
Lint-complimentary wipes
Isopropyl alcohol (rubbing booze)
Gel nail smoothen (optional)
Gel topcoat

How to apply builder gel

There are ii chief ways to use builder gel.

One is by using a pot of gel and a blast brush similar the ones used for acrylic nails.

The other is to employ a builder gel in a bottle that comes with a brush and goes on like blast smoothen.

Let'due south break down the steps for both of these methods.

How to utilise architect gel with a tub and brush

Here are the steps to follow if you are using a tub of builder gel and a nail castor:

1. File and buff your nails to the desired shape and smooth out the surface.

2. Remove all the grit from your nails with a lint-complimentary wipe soaked in rubbing alcohol.

iii. Push back your cuticles (using a cuticle pusher or your fingers) and remove whatever backlog skin.

4. Apply smash tips or forms (if you're doing extensions)

5. Utilise a thin layer of either a dehydrator, gel base, or primer/bonder to your nails and permit it dry completely (this will help the product to adhere better).

six. Glide the nail brush over the surface of the gel in the pot (you only really desire gel on i side of the brush)

7. Utilise a thin layer of builder gel to your nails, starting from the base and moving up to the tip. Exist sure to cap the gratuitous edge. Don't cure the starting time thin layer, y'all're only making sure that your blast plate is fully covered.

8. Apply a thicker layer of the gel and place information technology where yous want information technology. You tin create a little apex if you desire for extra strength. Try non to dab or pat the gel, you should always be gliding and floating over the boom in a flowing motion.

nine. Cure under a UV lamp for ii minutes or an LED lamp for thirty seconds.

10. Wipe off the gluey layer with a lint-free wipe soaked in rubbing alcohol.

11. File the product down to create a smooth finish and nice clean edges

12. At this bespeak you lot tin can either add a top coat and cure (in which instance you're finished!) Or yous tin do 2 coats of gel polish, (curing after each glaze as you normally would) and and then add a top glaze and cure.

How to apply builder gel in a bottle.

A lot of people prefer to use builder gel in a canteen as it feels more familiar and is easier to command.

Hither are the steps you need to follow:

1. File, buff and shape your nails to create a shine surface.

2. Wipe off any dust with a lint-free wipe soaked in rubbing alcohol.

3. Push your cuticles back and prune them if needed.

four. Apply tips or forms (if using them).

5. Use a thin coat of either bonder, primer, dehydrator, or gel base glaze.

6. In one case the base is fully dry, apply a thin coat of gel to ensure the blast is covered. No need to cure yet!

seven. Go directly in with a thicker coat of gel, shaping the nail as you want.

8. Cure. 30 seconds under a LED lamp or 2 minutes under a UV lamp.

ix. File and shape your gel nails to go rid of whatever lumps and to create clean edges.

10. Wipe off the tacky layer with a lint-free wipe soaked in booze.

xi. Top coat and cure, then yous're washed! Or, if you similar you could add together two coats of gel polish (curing each glaze for either 2 minutes or 30 seconds depending on which lamp you accept), so top coat and a final cure.

Tips for using builder gel

Here are a few tips and tricks for using builder gel:

Make sure your nail plate is make clean and costless from oils

This is super of import considering if your nails aren't gratis from oils the gel won't stick and you'll get lifting.

You can either wipe them over with a lint-free wipe soaked in rubbing alcohol or spray your nails with rubbing alcohol then wipe it off.

Always remove the tacky layer

Don't forget to remove the sticky layer afterwards each cure, some builder gels accept quite a heavy inhibition (tacky) layer, and these need to be wiped off thoroughly.

Glide the brush, don't drag information technology.

Yous ever want to exist floating, gliding, or sweeping your brush when yous're using builder gels.

If the brush touches the surface of your nails you are either pushing downwardly besides hard or not using enough gel.

Never dunk your brush.

If you're using a tub or pot of gel and a castor, don't dunk your brush into the tub. Instead, glide the castor gently over the surface.

This will ensure that you lot become the production on merely i side of the brush which makes it much easier to apply.

Experiment with your brush technique

When it comes to application technique, anybody moves their brush slightly differently.

So experience free to experiment with swirls, downward strokes, and side-to-side sweeps to meet which brush movements piece of work best for you.

Mind the gap.

If you are using forms, make sure that there is no gap underneath where the foil meets your natural nail – if there is a small gap, yous'll end upwards trying to file downward the backs of your nail extensions which is really hard to practice.

Tin you put gel polish over architect gel?

Yes, you can put gel polish over builder gel.

In fact, a lot of people similar to do this as information technology means that you can change your boom color without having to remove the whole affair.

To exercise this, simply apply a thin layer of gel smooth over the top of your architect gel and cure as normal.

But y'all must make sure that you remove the sticky layer earlier you use your gel polish.

How to remove builder gel

How you will remove your builder gel depends on what type of product you are using.

Some can be soaked off straight away, while others need to be filed down first.

Soak-off gels tin can usually be removed in around 10-20 minutes, while non-soak-off gels can accept upwardly to 30 minutes to remove.

To remove architect gel nails y'all'll demand:

Pure acetone
Cotton assurance or pads
Tinfoil strips or plastic smash clips
A strong nail file

Steps for removing builder gel

Cut and/or file downward as much of the simulated smash equally you can
Soak the cotton balls in acetone
Place a soaked cotton ball onto each smash and secure with a nail clip or foil strip
Wait for 10 to xv minutes and then remove the cotton ball and gently scrape off any excess gel with an orangewood stick
Repeat the first 4 steps if needed
Vitrify your nails and apply cuticle oil

That's it! I hope that this commodity has helped you to understand how to use architect gel. It's actually not that complicated in one case you get used to it.

Cheers for reading and I'll meet y'all adjacent time 🙂